Stancemagic Hubcentric Rings (Pack Of 4) – 56.1Mm Id To 72.6Mm Od – Silver Aluminum Hubrings – For 56.1Mm Vehicle Hubs And 72.6Mm Wheel Centerbore – Compatible With Subaru Honda Acura Scion Frs

Description

WHAT ARE HUB CENTRIC RINGS? (Also called hubrings, hubcentric rings, centering rings) This device is installed between the vehicle’s hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel’s centerbore is not already centered around the hub. WHY DO I NEED IT? You may experience steering wheel vibrations if your wheel’s centerbore does not perfectly center on your vehicle’s hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle’s hub. HOW CAN I CONFIRM FITMENT? – Hubrings have 2 measurements, typically in millimeters (mm). – The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 56.1mm. This should match your vehicle’s hub bore. – The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 72.6mm. This should match your wheel’s centerbore. COMPATIBILITY INFORMATION These hubrings are compatible with vehicles with a 56.1mm Hub. Your Wheel Bore must be 72.6mm. IMPORTANT NOTES – BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING – Buyers must ensure their Vehicle’s Hub is 56.1mm. – Buyers must ensure their Wheel’s Centerbore is 72.6mm. – If you are not unsure about fitment or the measurements, please do not guess. Use the “Have a Question?” section below. Be sure to include vehicle year/make/model. INSTALLATION ADVISORY Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.